NESHAP for Rubber Tire Manufacturing (40 CFR part 63, subpart XXXX) (Final Rule)
Revision of a currently approved collection
No
Regular
02/28/2025
Requested
Previously Approved
36 Months From Approved
02/28/2025
62
34
7,032
5,870
1,970,000
0
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Rubber Tire Manufacturing (40 CFR Part 63, Subpart XXXX) were proposed on October 18, 2000, promulgated on July 9, 2002, and amended on March 12, 2003, April 20, 2006, and July 24, 2020. These regulations apply to existing and new facilities that are involved in rubber processing, tire production, tire cord production, and puncture sealant application.
The amendments being proposed in this action will regulate emissions from rubber processing mixers.
New facilities include those that commenced construction or reconstruction after the date of proposal. This information is being collected to assure compliance with 40 CFR Part 63, Subpart XXXX.
In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP.
Any owner/operator subject to the provisions of this part shall maintain a file containing these documents and retain the file for at least five years following the generation date of such maintenance reports and records. All reports are sent to the delegated state or local authority. If there is no such delegated authority, then the reports are sent directly to the U.S. Environmental Protection Agency (EPA) regional office.
This estimate is the burden for the final amendments to add new regulatory requirements to reduce emissions from rubber processing mixers. These amendments reflect a change in the current burden for the regulation of other emission subcategories in the rubber tire manufacturing industry under 40 CFR 63, Subpart XXXX. The number of sources presented in this ICR reflects current data obtained from industry and has not changed compared to the Proposal ICR. Labor hours have been added for the collection and analysis of data, to submit notifications and reports, and to keep records required to demonstrate compliance with the emission limitations for rubber processing. Capital O&M costs are slightly higher than the previously approved ICR due to the added requirements for monitoring of control devices, including BLDS and THC CEMS.
$12,000
No
No
No
No
No
No
No
Korbin Smith 919 541-2416
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.