NESHAP for Epoxy Resin and Non-Nylon Polyamide Production (40 CFR part 63, subpart W) (Final Rule)
Revision of a currently approved collection
No
Regular
02/28/2025
Requested
Previously Approved
36 Months From Approved
02/28/2025
59
54
4,142
3,940
1,774,000
14,000
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Epoxy Resin and Non-Nylon Polyamide Production (40 CFR Part 63, Subpart W) were proposed on: May 16, 1994; promulgated on March 8, 1995; and revised on April 20, 2006. The final rule was reviewed under Section 112(d)(6) risk and technology review provisions of the Clean Air Act during 2008; however, the final rule of December 16, 2008 (73 FR 76220) did not result in additional revisions. These regulations apply to either existing facilities and new facilities producing basic liquid epoxy resin (BLR) and epichlorohydrin-modified non-nylon polyamide resins, also known as wet strength resins (WSR). The source subject to this provision emits the hazardous air pollutants (HAPs) epichlorohydrin, and in lesser amounts, hydrochloric acid and methanol. New facilities include those that either commenced construction or reconstruction after the date of proposal. The EPA is finalizing amendments to P&R II to add requirements pertaining to: heat exchange systems, PRDs, dioxins and furans emissions from process vents, and maintenance vents. In addition, the EPA is finalizing amendments to P&R II that revise provisions pertaining to emissions during periods of SSM, add requirements for electronic reporting of periodic reports and performance test results, and make other minor clarifications and corrections. This information is being collected to assure compliance with 40 CFR Part 63, Subpart W. This information collection request documents the recordkeeping and reporting requirements and burden imposed only by these final amendments. The burden from the existing rule requirements is accounted for in EPA ICR number 1681.10.
In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP.
New provisions included in the rulemaking result in an increase of 202 burden hours per year over the existing base collection. Base burden levels remain the same. There were no change in burden between the proposed and final rulemaking ICRs.
$12,070
No
No
No
No
No
No
No
Robert Burchard 202 343-9126 burchard.robert@epa.gov
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
1681t12.xlsx
1681ss12.docx
NESHAP for Epoxy Resin and Non-Nylon Polyamide Production (40 CFR Part 63, Subpart W)( Rule Provisions2060-AV71)