NESHAP for Aluminum, Copper, and Other Non-Ferrous Foundries (40 CFR part 63, subpart ZZZZZZ) (Renewal)
Extension without change of a currently approved collection
No
Regular
05/23/2022
Requested
Previously Approved
36 Months From Approved
05/31/2022
64
64
11,900
11,900
0
0
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Aluminum, Copper and Other Non-ferrous Metals Foundries apply to both existing and new facilities conducting melting operations located at an aluminum, copper, or other non-ferrous foundry that is an area source of hazardous air pollutants (HAP) emissions, melts 600 tons per year (tpy) of aluminum, copper, or other non-ferrous metal or greater, and uses material that contains or has the potential to emit HAP for which the source category was listed. New facilities include those that commenced construction, modification or reconstruction after the date of proposal. In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP. This information is being collected to assure compliance with 40 CFR Part 63, Subpart ZZZZZZ. .
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.